Drywall Tape Bubbling How to Fix It: Expert Solutions

Drywall Tape Bubbling How to Fix It

Drywall tape bubbling can be fixed by cutting out the bubble, applying a second coat of mud, and then sanding and repainting the area. This will ensure a smooth and seamless finish to the drywall surface.

Dealing with drywall tape bubbling can be frustrating, but with the right techniques, you can fix this issue effectively. Bubbling typically occurs due to a lack of joint compound during the initial taping process, leading to air pockets forming under the tape.

In this guide, we’ll explore the common causes of drywall tape bubbling and provide step-by-step instructions on how to fix it. By understanding the root causes and following the correct repair methods, you can achieve professional-looking results and restore the integrity of your drywall.

Identifying Drywall Tape Bubbling

Drywall tape bubbling manifests as raised or uneven areas along the seams of drywall.

Common Causes Of Bubbling

  • Insufficient Joint Compound: Applying too little joint compound can lead to tape not adhering properly.
  • Moisture: Water damage or high humidity levels can cause tape to bubble.
  • Improper Application: Incorrect tape placement or inadequate smoothing can result in bubbling.

DIY Fixes For Drywall Tape Bubbling

Dealing with drywall tape bubbling can be frustrating, but with the right techniques, you can easily fix the issue yourself. Here are some DIY fixes for drywall tape bubbling that you can try at home:

Cutting Out The Bubble

If you notice a bubble in the drywall tape, the first step is to carefully cut it out using a utility knife. Ensure to clean away any cracking or chipping paint and old tape to remove any uneven or bulging areas.

Applying A Second Coat Of Mud

After cutting out the bubble, apply joint compound over and around the seams that previously bulged. Then, apply a coat of drywall mud, ensuring even pressure along the length to prevent bubbles from forming.

Using Primer To Fix Bubbles

Once the second coat of mud is dry, apply a first coat of primer to the repaired area. Squeeze out the excess from each end and then apply the first coat of primer, ensuring an even and smooth finish.

Expert Advice On Fixing Drywall Tape Bubbling

Drywall tape bubbling can be a frustrating issue, but with the right guidance, it can be easily resolved. Whether you’re a DIY enthusiast or a professional contractor, knowing how to fix drywall tape bubbling is essential. In this article, we’ll provide expert advice and insights on fixing drywall tape bubbling to help you tackle this common problem effectively.

Insights From Myron R. Ferguson

Myron R. Ferguson, a renowned expert in the field of drywall installation, emphasizes the importance of proper technique and attention to detail when fixing drywall tape bubbling. His instructional videos offer valuable tips and step-by-step demonstrations for addressing this issue.

Tips From Professional Contractors

Professional contractors who have encountered and successfully resolved drywall tape bubbling share their expertise through various online platforms. Their practical advice, ranging from applying joint compound to cutting out old tape, provides actionable solutions for anyone dealing with this common problem.

Preventing Drywall Tape Bubbling

Ensuring the joint compound is applied correctly is crucial in preventing drywall tape bubbling. Applying the compound evenly and with the right amount of pressure can help avoid air pockets that lead to bubbling.

Properly mixing the joint compound before application is essential. Inadequate mixing can result in inconsistent texture, which may cause the tape to bubble. Ensure the compound is mixed thoroughly for a smooth finish.

Dealing With Severe Bubbling Issues

Drywall Tape Bubbling How to Fix It

Dealing with severe bubbling issues on drywall tape? Fix it by cutting out the bubble, applying a second coat of mud, and smoothing it out for a seamless finish. Check out DIY tutorials for step-by-step instructions on resolving this common drywall problem.

Removing The Tape

When dealing with severe bubbling issues in drywall tape, it is essential to start by removing the tape that is causing the problem. Carefully cut out the bubbled section of the tape using a utility knife, ensuring to clean away any residual adhesive left on the drywall surface. It’s important to be thorough in this process to ensure a smooth application of new tape and compound.

Reapplying Drywall Compound

After removing the problematic tape, the next step is to reapply drywall compound to the affected area. Begin by applying a thin, even layer of joint compound over the area where the tape was removed. Smooth the compound with a drywall knife to ensure it blends seamlessly with the surrounding surface. Once the first layer is dry, apply a second coat of joint compound to create a smooth and uniform finish.

Understanding Joint Compound

Role Of Joint Compound

Joint compound plays a crucial role in drywall installation as it is used to cover joints and create a smooth surface.

Proper Consistency For Application

It is essential to maintain the proper consistency of joint compound for smooth application on drywall tape to avoid bubbling issues.

Professional Solutions For Bubbling Tape

For professional solutions to bubbling drywall tape, learn how to fix it effectively with expert tips and techniques. Discover the best methods to repair and prevent bubbling tape, ensuring a flawless finish for your drywall projects.

Seeking Professional Help

If you have tried DIY solutions to fix bubbling tape on your drywall and failed, it might be time to seek professional help. Professional contractors have the experience and knowledge to identify the root cause of bubbling tape and provide a long-lasting solution. They can also help you save time and money by preventing further damage to your drywall.

Professional Repair Services

Professional repair services can provide you with a variety of options to fix bubbling tape, depending on the severity of the damage. They can replace the damaged section of drywall, reapply tape, and apply multiple coats of joint compound to ensure a smooth finish. They can also use specialized tools such as a drywall sander to smooth out any rough spots.

In addition, professional repair services can also help you identify any underlying issues that may have caused the bubbling tape. These issues could include moisture problems, improper installation, or poor quality materials. By addressing these issues, you can prevent bubbling tape from occurring in the future.

Overall, seeking professional help and repair services can save you time and money in the long run, and ensure that your drywall looks smooth and polished. Don’t hesitate to reach out to a professional contractor if you are struggling with bubbling tape on your drywall.

Drywall Tape Bubbling How to Fix It

Frequently Asked Questions

How Do You Fix Bubbling Drywall Tape?

To fix bubbling drywall tape, cut out the bubble, apply joint compound, and smooth it out. Apply a second coat if needed. Sand and paint for a seamless finish. Avoid applying too little compound to prevent bubbles. Check for uneven areas and apply compound evenly.

How Do You Fix Bulging Drywall Tape?

To fix bulging drywall tape, cut and clean the area, then apply joint compound over and around the seams that bulged.

What Causes Drywall Tape Blisters?

Bubbles in drywall tape are caused by a lack of compound. Apply compound generously and evenly to the joint, and use even pressure when drawing your knife over the tape. Sometimes, excess compound will squeeze out and leave a bubble.

How To Fix Ripples In Drywall?

To fix ripples in drywall, sand it to smooth high spots, fill depressions with plaster, then prime and paint.


To sum up, fixing bubbling drywall tape is a manageable task with the right techniques. By cutting out bubbles, applying multiple coats of mud, and ensuring proper primer application, you can achieve a smooth finish. Don’t let tape blisters ruin your walls – follow these steps for a flawless result.

Md. Meraj

This is Meraj. I’m the main publisher of this blog. Home Improvement Way is a blog where I share Home Improvement Way tips and tricks, reviews, and guides. Stay tuned to get more helpful articles!

Recent Posts